Tundra 2WD V8-4.6L (1UR-FE) (2010)
Removal
SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for CrewMax): REMOVAL
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. REMOVE REAR SEAT ASSEMBLY
(a) Remove the rear seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for Double
Cab)/Removal.
2. REMOVE BACK PANEL TRIM RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Removal