Tundra 2WD V8-4.6L (1UR-FE) (2010)
Seat Belt: Testing and Inspection
Front Seat Inner Belt Assembly
SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSPECTION
1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
*
If the result is not as specified, replace the inner belt assembly.
Front Seat Outer Belt Assembly (for Center Seat)
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat): INSPECTION
1. INSPECT CENTER FRONT SEAT BELT ASSEMBLY RH
CAUTION:
Do not disassemble the retractor.
(a) Before installing the seat belt, check the ELR.
(1) When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor
is over 45°, check that the belt locks. If the operation is not as specified, replace the seat belt assembly.
(b) Check the fastening function of the child restraint system.
NOTICE: