Tundra 2WD V8-4.6L (1UR-FE) (2010)
Remote Switch: Service and Repair
Installation
AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION
1. INSTALL STEERING PAD SWITCH ASSEMBLY
(a) Attach the 4 pins to install the switch with the 2 screws.
(b) Connect the connector.
2. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
3. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
4. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Installation
7. CHECK SRS WARNING LIGHT See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Installation