Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-220002.png)
Telescopic Steering Column)/Removal
2. REMOVE LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Removal and Replacement/Steering Column Assembly (for Power Tilt and Power
Telescopic Steering Column)/Removal
3. REMOVE UNLOCK WARNING SWITCH ASSEMBLY
(a) Disconnect the unlock warning switch connector.
(b) Detach the 3 claws and remove the cover.
(c) Remove the contact pin cap.
(d) Remove the unlock warning switch.
Installation
DOOR LOCK: UNLOCK WARNING SWITCH: INSTALLATION
1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY
(a) If reusing unlock warning switch assembly:
(1) Temporarily install the unlock warning switch.
(2) Install the contact pin cap.
(3) Attach the 3 claws to install the cover.
