Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-350001.png)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal
AIR CONDITIONING: PRESSURE SWITCH: REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Heating and Air Conditioning/Service and Repair
2. REMOVE PRESSURE SWITCH
(a) Disconnect the connector.
(b) Remove the switch.
(c) Remove the O-ring from the pressure switch.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
