Tundra 2WD V8-4.6L (1UR-FE) (2010)
(b) Disconnect the connector and remove the courtesy switch.
Installation
LIGHTING: FRONT DOOR COURTESY SWITCH: INSTALLATION
HINT
*
Use the same procedures for the RH and LH side.
*
The procedures listed below are for the LH side.
*
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard
Bolt - Specified Torque For Standard Bolts
1. INSTALL FRONT DOOR COURTESY SWITCH
(a) Connect the connector.
(b) Install the courtesy switch with the bolt.