Tundra 2WD V8-4.6L (1UR-FE) (2010)
Crankshaft Position Sensor: Service and Repair
Installation
1UR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Install the sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the sensor connector.
2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR
(a) Install the sensor protector with the 2 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)