Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-1824002.png)
2. REMOVE NO. 2 CONSOLE BOX REGISTER ASSEMBLY See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Disassembly
3. REMOVE NO. 1 CONSOLE BOX REGISTER ASSEMBLY See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Disassembly
4. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL
(a) for AC Power Supply:
Disconnect the clamp.
(b) Remove the 4 screws and bezel.
5. REMOVE REAR POWER OUTLET SOCKET (for Standard)
(a) Detach the claw and remove the power outlet socket.
6. REMOVE REAR POWER OUTLET SOCKET COVER (for Standard)
(a) Detach the 2 claws and remove the power outlet socket cover.
7. REMOVE REAR POWER POINT SOCKET (for AC Power Supply)
(a) Detach the 2 claws and remove the power outlet socket.
