Tundra 2WD V8-4.6L (1UR-FE) (2010)
7. REMOVE REAR POWER OUTLET SOCKET COVER (for Double Cab)
(a) Detach the 2 claws and remove the power outlet socket cover.
Installation
OTHER SYSTEM: CENTER POWER OUTLET SOCKET (for Floor Shift Type): INSTALLATION
1. INSTALL REAR POWER OUTLET SOCKET COVER (for Double Cab)
(a) Attach the 2 claws to install the power outlet socket cover.
2. INSTALL REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab)
(a) Attach the claw to install the power outlet socket.
3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY (for Double Cab) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Floor Shift Type)/Installation
4. INSTALL POWER OUTLET SOCKET COVER
(a) Attach the 2 claws to install the power outlet socket cover.
5. INSTALL POWER OUTLET SOCKET ASSEMBLY