Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-1825011.png)
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal
6. REMOVE CENTER LOWER INSTRUMENT COVER See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal
7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY
8. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal
9. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver, detach the claw and remove the power outlet socket.
HINT
Tape the screwdriver tip before use.
10. REMOVE POWER OUTLET SOCKET COVER
(a) Detach the 2 claws and remove the power outlet socket cover.
Installation
OTHER SYSTEM: POWER OUTLET SOCKET (for Column Shift Type): INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER
(a) Attach the 2 claws to install the power outlet socket cover.
2. INSTALL POWER OUTLET SOCKET ASSEMBLY
