Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2009005.png)
(c) Align the notch of the front side plate with the notch of the front housing, and install the front side plate.
NOTICE:
Make sure that the front side plate is installed facing in the correct direction.
4. INSTALL VANE PUMP CAM RING
(a) Coat the cam ring with the power steering fluid.
(b) Align the notch of the cam ring with the notch of the front side plate, and install the cam ring with the inscribed mark facing upward.
NOTICE:
Make sure that the cam ring is installed facing in the correct direction.
5. INSTALL VANE PUMP ROTOR
(a) Install the vane pump rotor.
