Tundra 2WD V8-4.6L (1UR-FE) (2010)
Steering Control Module: Service and Repair
Installation
POWER STEERING: POWER STEERING ECU (for 1UR-FE): INSTALLATION
1. INSTALL POWER STEERING ECU ASSEMBLY
(a) Install the power steering ECU with the nut.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Connect the power steering ECU connector.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Driver Side Knee Airbag Assembly/Installation
4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
5. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
6. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For
Regular Cab)/Installation
7. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(For Regular Cab)/Installation