Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2045004.png)
Use the same procedures described for the LH side.
7. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
(a) Using a union nut wrench, disconnect the pressure feed tube (return tube side) from the power steering gear.
(b) Using a union nut wrench, disconnect the pressure feed tube (pressure feed tube side) from the power steering gear.
(c) Remove the 2 bolts and disconnect the pressure feed tube clamp.
8. REMOVE POWER STEERING GEAR ASSEMBLY
(a) Remove the 2 bolts, 2 nuts and power steering gear.
NOTICE:
Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut fixed.
Installation
