Tundra 2WD V8-4.6L (1UR-FE) (2010)
(b) Using a 32 mm hexagon wrench, remove the rack guide spring cap.
(c) Remove the spring and rack guide.
10. REMOVE POWER STEERING CONTROL VALVE
(a) Wind vinyl tape around the serrated portion of the control valve.
(b) Remove the dust cover from the control valve housing.
(c) Remove the 2 bolts.
(d) Pull out the control valve from the rack housing.
(e) Remove the control valve oil seal.
(f) To prevent the oil seal lip from getting damaged, wind vinyl tape around the serrated portion of the control valve.
(g) Using a plastic hammer, remove the control valve from the control valve housing.