Tundra 2WD V8-4.6L (1UR-FE) (2010)
(c) Using SST, disconnect the upper ball joint from the steering knuckle.
SST : 09628-62011
(d) Remove the steering knuckle.
7. REMOVE KNUCKLE GREASE RETAINER CAP LH (for 2WD)
(a) Using a screwdriver and hammer, tap out the retainer cap.
8. REMOVE STEERING KNUCKLE OIL SEAL LH (for 4WD)
(a) Using a screwdriver and hammer, tap out the oil seal.