Tundra 2WD V8-4.6L (1UR-FE) (2010)
(b) Press down on the vehicle several times to stabilize the suspension.
3. TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Tighten the nut.
Torque : 195 Nm (1988 kgf-cm, 144 ft-lbf)
(b) Tighten the 4 upper nuts in diametrically opposite pairs.
Torque : 45 Nm (459 kgf-cm, 33 ft-lbf)
(c) Check that the first nut that was tightened is at the torque specification.
4. INSTALL FRONT WHEEL
for Aluminum Wheel - Torque : 131 Nm (1336 kgf-cm, 97 ft-lbf)
for Steel Wheel - Torque : 209 Nm (2131 kgf-cm, 154 ft-lbf)
Disposal
SUSPENSION: FRONT SHOCK ABSORBER: DISPOSAL
1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH
(a) Fully extend the shock absorber rod.