Tundra 2WD V8-4.6L (1UR-FE) (2010)
(b) Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
CAUTION:
*
Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
*
For off road type shock absorbers, be extremely careful when drilling it as its gas pressure is much higher than the standard type.
NOTICE:
The gas is colorless, odorless and nonpoisonous.
Components
SUSPENSION: REAR SHOCK ABSORBER: COMPONENTS