Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-1520006.png)
(c) Securely connect the 2 wire terminals to terminal 6 and 13 of the transmission control switch connector.
3. CONNECT NO. 1 SHIFT LOCK PLATE SUB-ASSEMBLY
(a) Using a hammer, tap in the spring pin to connect the shift lock plate and shift lock solenoid.
4. INSTALL SHIFT LOCK SOLENOID
(a) Install the shift lock solenoid with No. 1 shift lock plate sub-assembly, 2 bushes and collar to the column shift control shift lever retainer with
the screw.
Torque : 1.2 Nm (12 kgf-cm, 11 in-lbf)
(b) Attach the 2 claws to install the shift lock solenoid bracket.
(c) Securely connect the 2 wire terminals to terminal 1 and 8 of the transmission control switch connector.
