Tundra 2WD V8-4.6L (1UR-FE) (2010)
(a) Disconnect the No. 4 oil cooler inlet hose and No. 4 oil cooler outlet hose from the cooler condenser.
(b) Remove the bolt and No. 2 oil cooler tube together with the 2 oil cooler hoses.
(c) Remove the No. 4 oil cooler inlet hose and No. 4 oil cooler outlet hose from the No. 2 oil cooler tube.
9. REMOVE OIL COOLER TUBE (w/ Trailer Towing System)
(a) Remove the 2 bolts and oil cooler tube.