Tundra 2WD V8-4.6L (1UR-FE) (2010)
Removal
DIFFERENTIAL: DIFFERENTIAL CARRIER ASSEMBLY (for 1GR-FE, 1UR-FE): REMOVAL
1. REMOVE REAR WHEEL
2. REMOVE PROPELLER SHAFT ASSEMBLY
(a) Remove the propeller shaft for 2WD See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Removal.
(b) Remove the propeller shaft for 4WD See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Removal.