Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-1549018.png)
21. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
(a) Install the drive pinion, front bearing (inner race) and oil slinger.
(b) Using SST and the companion flange, install the bearing (inner race) and then remove the companion flange.
SST : 09950-30012
09951-03010
09953-03010
09954-03010
09956-03050
SST : 09955-03050
22. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL
(a) Using SST and a plastic-faced hammer, tap in a new oil seal until its surface is flush with the differential carrier end.
SST : 09316-12010
SST : 09649-17010
Standard oil seal depth:
