Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-1559002.png)
Required Tools & Equipment
Repair Procedure Overview
^
Confirm noise is coming from the rear of the vehicle and changes with vehicle speed.
^
Install ChaSSiSEAR(TM) (or equivalent) and isolate the noise to the rear wheel bearing.
^
Remove the rear axle shaft assembly.
^
Install new rear wheel bearing brake caliper bracket and seals.
^
Reinstall rear axle shaft assembly and confirm the noise is no longer present.
Repair Procedure
1. Test drive the vehicle and confirm the customer complaint.
Does the noise increase and decrease with vehicle speed?
^
YES - Go to step 2.
^
NO - This TSB does NOT apply. Refer to the Repair Manual for further diagnosis.
