Tundra 2WD V8-4.6L (1UR-FE) (2010)
(b) Using a T25 ''TORX'' driver, install the motor with the 3 screws.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
HINT
For a new rear window regulator, the installation position of the regulator will be set when the self-tapping screws are installed.
2. INSTALL REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY LH
(a) for Double Cab:
Install the rear door window regulator sub-assembly LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Rear Door (for Double Cab)/Reassembly.
(b) for CrewMax:
Install the rear door window regulator sub-assembly LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Rear Door (for CrewMax)/Reassembly.
3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH
(a) for Double Cab:
Install the rear door glass sub-assembly LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door
(for Double Cab)/Reassembly.
(b) for CrewMax:
Install the rear door glass sub-assembly LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door
(for CrewMax)/Reassembly.
4. INSTALL REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY LH
(a) for Double Cab:
Install the rear door rear lower window frame sub-assembly LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Rear Door (for Double Cab)/Reassembly.
(b) for CrewMax:
Install the rear door rear lower window frame sub-assembly LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Rear Door (for CrewMax)/Reassembly.
5. INSTALL REAR DOOR GLASS RUN LH
(a) for Double Cab:
Install the rear door glass run LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door (for
Double Cab)/Reassembly.
(b) for CrewMax:
Install the rear door glass run LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door (for
CrewMax)/Reassembly.