Tundra 2WD V8-4.7L (2UZ-FE) (2003)
Ball Joint: Service and Repair
Upper
REMOVAL
1. REMOVE STEERING KNUCKLE WITH AXLE HUB
2. REMOVE UPPER BALL JOINT
a. Remove the wire and boot.
b. Using a snap ring expander, remove the snap ring.
Ball Joint: Service and Repair
Upper
REMOVAL
1. REMOVE STEERING KNUCKLE WITH AXLE HUB
2. REMOVE UPPER BALL JOINT
a. Remove the wire and boot.
b. Using a snap ring expander, remove the snap ring.