Tundra 4WD V6-3.4L (5VZ-FE) (2004)
/Page-374002.png)
9. INSTALL OIL PRESSURE SWITCH
a. Apply adhesive to 2 or 3 threads.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
b. Using SST, install the oil pressure switch.
SST 09810-30010
Torque: 15 Nm (150 kgf-cm, 11 ft. lbs.)
10. START ENGINE AND CHECK FOR LEAKS
