Tundra 4WD V6-3.4L (5VZ-FE) (2004)
c. Install a new adjusting shim.
1. Place a new adjusting shim on the valve lifter, with imprinted numbers facing down.
2. Press down the valve lifter with SST (A), and remove SST (B).
SST 09248-55040 (09248-05410, 09248-05420)
d. Recheck the valve clearance.
7. REINSTALL CYLINDER HEAD COVERS
8. REINSTALL INTAKE AIR CONNECTOR
9. REFILL WITH ENGINE COOLANT
10. START ENGINE AND CHECK FOR LEAKS