Tundra 4WD V6-3.4L (5VZ-FE) (2004)
/Page-1192004.png)
1. Access cab, Standard cab: INSPECT ILLUMINATION OPERATION
Connect the positive (+) lead from the battery to terminal B7 and negative (-) lead to terminal A8 then check that the illuminations lights up.
If operation is not as specified, check the faulty bulb.
2. Double cab: INSPECT ILLUMINATION OPERATION
Connect the positive (+) lead from the battery to terminal B2 and negative (-) lead to terminal Bli then check that the illuminations lights up.
If operation is not as specified, check the faulty bulb.
