toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Instruments - Multiple Gear Ranges Displayed/DTC P0705|Page 5090 > < Electrical - Intermittent Hard Start/Long Crank Time|Page 5085
Page 1
background image

Grounding Point: Customer Interest
Instruments - Multiple Gear Ranges Displayed/DTC P0705

ELECTRICAL
EL005-04

Title:
M.I.L. "ON" DTC P0705 WITH UNUSUAL
COMBINATION METER OPERATION

Models
'03 - '04 Tundra

May 19, 2004

Introduction

Some customers with 2003 or 2004 model year Tundra vehicles may complain of a M.I.L. "ON" condition, Diagnostic Trouble Code P0705 in the
system, and intermittent faint glowing of multiple gear selector ranges at the same time (while the transmission selector still shows correct position). An
updated Combination Meter Ground Screw has been made available to address these issues.

Applicable Vehicles

^

2003 - 2004 model year Tundra vehicles produced BEFORE the Production Change Effective VINs shown.

Production Change Information

Parts Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Instruments - Multiple Gear Ranges Displayed/DTC P0705|Page 5090 > < Electrical - Intermittent Hard Start/Long Crank Time|Page 5085