Tundra 4WD V6-3.4L (5VZ-FE) (2004)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. REMOVE ENGINE UNDER COVER
2. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the crankshaft position sensor connector.
b. Remove the bolt and crankshaft position sensor.
INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
a. Install the crankshaft position sensor with the bolt.
Torque: 8 N.m (80 kgf.cm, 70 in.lbf)
b. Connect the crankshaft position sensor connector.
2. INSTALL ENGINE UNDER COVER