Tundra 4WD V6-3.4L (5VZ-FE) (2004)
/Page-572001.png)
Oxygen Sensor: Testing and Inspection
Air-Fuel Ratio (A/F) Sensor
INSPECTION
1. INSPECT HEATER RESISTANCE OF A/F SENSOR (Bank 1 Sensor 1)
a. Disconnect the sensor connector.
b. Using an ohmmeter, measure the resistance between terminals +B and HT.
If the resistance is not as specified, replace the sensor.
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
c. Reconnect the sensor connector
2. INSPECT OPERATION OF A/F SENSOR
