Toyota Workshop Service and Repair Manuals > Tundra 4WD V6-3.4L (5VZ-FE) (2004) > Powertrain Management | Sensors and Switches - Powertrain Management | Sensors and Switches - Computers and Control Systems | Camshaft Position Sensor | Component Information | Locations

Page 2

a. Install the camshaft position sensor with the bolt.

Torque: 8 N.m (80 kgf.cm, 70 in.lbf)

b. Connect the camshaft position sensor connector.

2. INSTALL NO.2 TIMING BELT COVER

Toyota Workshop Service and Repair Manuals