Tundra 4WD V6-3.4L (5VZ-FE) (2004)
Alternator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the bolt 3 nuts, plate terminal and end cover.
c. Remove the brush holder cover from the brush holder.
2. REMOVE BRUSH HOLDER
a. Remove the 2 screws and brush holder.
b. Remove the seal plate from the rectifier end frame.
3. REMOVE VOLTAGE REGULATOR
Remove the 3 screws and voltage regulator.