Tundra 4WD V6-3.4L (5VZ-FE) (2004)
/Page-1023003.png)
D.
Disconnect the alternator connector and clamp.
E.
Remove the nut, and disconnect the alternator wire.
F.
Disconnect the connector from the relay block No.2.
G.
Disconnect the wire clamp.
H.
Raise the vehicle on a lift.
3.
Remove Left Front Tire.
4.
Remove Front Fender Apron Seal.
A.
Remove the 4 clips and the front fender apron rear LH seal.
