Tundra 4WD V6-3.4L (5VZ-FE) (2004)
4. REMOVE OIL STRAINER
NOTICE: Be careful as some fluid will come out of the oil strainer.
a. Separate the solenoid wire.
b. Remove the 4 bolts, oil strainer and 3 gaskets.
5. DISCONNECT 4 CONNECTORS FROM EACH SHIFT SOLENOID VALVE
6. REMOVE VALVE BODY
Remove the 20 bolts and valve body.
7. REMOVE SHIFT SOLENOID VALVE
a. Remove the 2 bolts and 3 shift solenoid valves.
b. Turn the valve body, remove the bolt, lock plate and shift solenoid valve.
c. Remove the 3 O-rings from the 3 solenoid valves.
8. REMOVE DETENT SPRING
9. REMOVE MANUAL VALVE
10. INSTALL MANUAL VALVE