Tundra 4WD V6-3.4L (5VZ-FE) (2004)
a. Disconnect the connector.
b. Remove the 7 bolts and regulator.
HINT: Remove the back window regulator assembly through the service hole.
NOTE: When the bolts are removed, the back window regulator assembly may fall and become deformed.
22. Power vertical type:
REMOVE BACK WINDOW MOULDING
a. Remove the 8 bolts and the bracket LH and RH.
b. Remove the 2 clips.
c. Using a drill of less than Dia 4 mm (0.16 in.), drill out the 14 rivet heads and remove the moulding.
NOTE:
-
Be sure to gently place the drill perpendicular to the rivet, otherwise the rivet hole and the drill itself will be damaged.
-
Be careful as the cut rivet will be very hot.
-
Cover the panel with a shop rag to prevent metal debris form entering inside the panel.
23. Fix type, Slide type, Power slide type:
REMOVE BACK WINDOW GLASS