Tundra 4WD V8-4.6L (1UR-FE) (2010)
Amplifier: Service and Repair
Installation
AUDIO / VISUAL: STEREO COMPONENT AMPLIFIER: INSTALLATION
1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
(a) Set the bracket's aligning protrusion labeled A into the floor's hole.
(b) Install the amplifier with the 3 bolts.
HINT
Tighten the bolts in the order shown in the illustration.
(c) Connect the 3 connectors.
2. INSTALL AUDIO AMPLIFIER COVER
(a) Set the cover on the stereo amplifier assembly.
(b) Attach the 3 clips.
3. INSTALL FRONT SEAT ASSEMBLY RH
(a) for Manual Seat:
Install the front seat RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual
Seat)/Installation.
(b) for Power Seat:
Install the front seat RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL