toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Floor Speaker (for CrewMax)|Page 8803 > < Floor Speaker (for CrewMax)|Page 8801
Page 4
background image

*

The procedures listed below are for the LH side.

1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 12 Speakers)

(a) Attach the 3 claws to install the speaker to the bracket.

NOTICE:
Do not touch the cone part of the speaker.

(b) Install the speaker with bracket to the lower frame bracket garnish with the 3 screws.

2. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

(a) Temporarily install the speaker by attaching the claws of the speaker to the door panel.

(b) Install the speaker with the 4 screws.

NOTICE:
Do not touch the cone part of the speaker.

HINT
Install the screws in the order shown in the illustration.

(c) Connect the connector.

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH   See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and

Repair/Front Door (for CrewMax)/Reassembly

4. INSTALL FRONT DOOR ARMREST COVER LH

5. INSTALL COURTESY LIGHT ASSEMBLY   See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Door

(for CrewMax)/Reassembly

6. INSTALL FRONT UPPER ARMREST BASE PANEL LH   See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and

Repair/Front Door (for CrewMax)/Reassembly

7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH   See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and

Floor Speaker (for CrewMax)|Page 8803 > < Floor Speaker (for CrewMax)|Page 8801