Tundra 4WD V8-4.6L (1UR-FE) (2010)
*
The procedures listed below are for the LH side.
1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)
(a) Attach the 3 claws to install the speaker to the bracket.
NOTICE:
Do not touch the cone part of the speaker.
(b) Install the speaker with bracket to the lower frame bracket garnish with the 3 screws.
2. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
(a) Temporarily install the speaker by attaching the claws of the speaker to the door panel.
(b) Install the speaker with the 4 screws.
NOTICE:
Do not touch the cone part of the speaker.
HINT
Install the screws in the order shown in the illustration.
(c) Connect the connector.
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Reassembly
4. INSTALL FRONT DOOR ARMREST COVER LH
5. INSTALL COURTESY LIGHT ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Door
(for Double Cab)/Reassembly
6. INSTALL FRONT UPPER ARMREST BASE PANEL LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Reassembly
7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and