Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2651029.png)
NOTICE:
Do not touch the cone part of the speaker.
7. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY RH
(a) Remove the 2 bolts.
(b) Remove the speaker and disconnect the connector.
NOTICE:
Do not touch the cone part of the speaker.
8. REMOVE NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
(a) Using a screwdriver, detach the 6 clips and 2 claws.
HINT
Tape the screwdriver tip before use.
(b) Remove the speaker panel.
9. REMOVE FRONT NO. 4 SPEAKER ASSEMBLY (for 10 Speakers)
(a) Remove the 2 bolts.
(b) Remove the speaker and disconnect the connector.
