Tundra 4WD V8-4.6L (1UR-FE) (2010)
Up to 11/2009
AUDIO / VISUAL: REAR DOOR SPEAKER (for Double Cab): REMOVAL
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR DOOR FRAME GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear
Door (for Double Cab)/Disassembly
3. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Rear Door (for Double Cab)/Disassembly
4. REMOVE REAR UPPER DOOR ARMREST BASE PANEL LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Rear Door (for Double Cab)/Disassembly
5. REMOVE COURTESY LIGHT ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door
(for Double Cab)/Disassembly
6. REMOVE REAR DOOR ARMREST COVER LH
7. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Rear Door (for Double Cab)/Disassembly
8. REMOVE REAR NO. 1 SPEAKER ASSEMBLY
(a) Disconnect the speaker connector.