Tundra 4WD V8-4.6L (1UR-FE) (2010)
Central Control Module: Service and Repair
Removal
AUDIO / VISUAL: MULTI-MEDIA INTERFACE ECU: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
(a) for Column Shift Type:
Remove the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal.
(b) for Floor Shift Type:
Remove the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Instrument Panel Safety Pad (for Floor Shift Type)/Removal.
3. REMOVE MULTI-MEDIA INTERFACE ECU
(a) Remove the nut.
(b) Disconnect the connector and remove the multi-media interface ECU.
4. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A
(a) Remove the 2 bolts and multi-display controller bracket A.