Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2729002.png)
5. REMOVE NO. 2 SIDE STEP BRACKET LH
(a) Remove the 2 bolts and side step bracket.
6. REMOVE NO. 3 SIDE STEP BRACKET LH
(a) Remove the 4 bolts and 2 side step brackets.
Reassembly
EXTERIOR: SIDE STEP: REASSEMBLY
1. INSTALL NO. 3 SIDE STEP BRACKET LH
(a) Install the 2 side step brackets with the 4 bolts.
Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)
2. INSTALL NO. 2 SIDE STEP BRACKET LH
(a) Install the side step bracket with the 2 bolts.
Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)
