Tundra 4WD V8-4.6L (1UR-FE) (2010)
6. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH LH
(a) Detach the 3 clips and front lower door frame bracket garnish.
7. REMOVE COURTESY LIGHT ASSEMBLY (w/ Power Window)
(a) Detach the claw and remove the courtesy light.
(b) Disconnect the connector.
8. REMOVE FRONT DOOR ARMREST COVER LH
9. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
(a) Remove the 2 screws.
(b) Using a clip remover, remove the clip.
(c) Detach the 10 clips and remove the trim cover. Then disconnect the connector.
(d) Disconnect the 2 cables from the inside handle.