Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2735005.png)
Disassembly
ENGINE HOOD / DOOR: REAR DOOR (for CrewMax): DISASSEMBLY
REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
HINT
*
Use the same procedures for the RH side and LH side.
*
The procedures listed below are for the LH side.
1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH
(a) Using a screwdriver, detach the 4 claws and remove the inside handle bezel.
