Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2735009.png)
(b) Attach the claw to install the courtesy light.
4. INSTALL REAR DOOR FRAME GARNISH LH
(a) Attach the 5 clips to install the rear door frame garnish.
5. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Attach the 4 claws to install the regulator switch.
6. INSTALL REAR UPPER DOOR ARMREST BASE PANEL LH
(a) Connect the connector.
(b) Attach the 2 clips to install the rear door armrest upper base panel.
7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH
(a) Attach the 4 claws to install the bezel plug.
