Tundra 4WD V8-4.6L (1UR-FE) (2010)
(2) w/ Front Fender Mudguard:
Install the front fender mudguard See: Spoilers, Flaps, and Air Dams/Mud Flap/Service and Repair/Installation.
(3) w/ Side Step:
Install the side step See: Auxiliary Step / Running Board/Service and Repair/Removal and Replacement/Installation.
(b) for Resin Type Bumper:
Install the fender apron mudguard seal.
(1) Install the fender apron mudguard with the 2 clips and 15 new clips labeled A.
(2) Install the pin hold clip so that its groove is vertical.
(3) w/ Front Fender Mudguard:
Install the front fender mudguard See: Spoilers, Flaps, and Air Dams/Mud Flap/Service and Repair/Installation.
(4) w/ Side Step:
Install the side step See: Auxiliary Step / Running Board/Service and Repair/Removal and Replacement/Installation.