Tundra 4WD V8-4.6L (1UR-FE) (2010)
Rear Fender Liner: Service and Repair
Installation
EXTERIOR: FENDER LINER (for Rear Side): INSTALLATION
HINT
*
Use the same procedures for the RH side and LH side.
*
The procedures listed below are for the LH side.
1. INSTALL REAR WHEEL HOUSE LINER LH
(a) Install the rear wheel house liner (front).
(1) Install the wheel house liner with 4 new clips.
(2) Install the 2 screws.
(b) w/o Rear Fender Mudguard:
Install the rear wheel house liner (rear).
(1) Install the rear wheel house liner with 7 new clips.
(2) Install the 2 screws.