Tundra 4WD V8-4.6L (1UR-FE) (2010)
Grille: Overhaul
Disassembly
EXTERIOR: RADIATOR GRILLE: DISASSEMBLY
1. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
(a) Detach the 3 claws and remove the radiator grille (or front panel) emblem.
2. REMOVE RADIATOR GRILLE PROTECTOR
(a) Remove the radiator grille protector.
Reassembly
EXTERIOR: RADIATOR GRILLE: REASSEMBLY
HINT
When installing the radiator grille protector, heat the radiator grille surface using a heat light.
Standard:
NOTICE:
Do not heat the radiator grille excessively.
1. INSTALL RADIATOR GRILLE PROTECTOR
(a) Clean the radiator grille sub-assembly surface.
(1) Using a heat light, heat the radiator grille sub-assembly surface.
(2) Remove the double-sided tape from the radiator grille sub-assembly surface.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new radiator grille protector.