Tundra 4WD V8-4.6L (1UR-FE) (2010)
LIGHTING: PERSONAL LIGHT ASSEMBLY (for Short Type Overhead Console Box): INSTALLATION
1. INSTALL ROOF CONSOLE BOX ASSEMBLY See: Service and Repair/Overhead Console Box (for Short Type)/Installation
Components
LIGHTING: PERSONAL LIGHT ASSEMBLY (for Outer Rear View Mirror): COMPONENTS
Removal
LIGHTING: PERSONAL LIGHT ASSEMBLY (for Outer Rear View Mirror): REMOVAL
HINT
*
Use the same procedure for the LH side and RH side.
*
The procedure listed below are for the LH side.
1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY See: Mirrors/Service and Repair/Outer Rear View Mirror Glass/Removal
2. REMOVE OUTER MIRROR LIGHT ASSEMBLY LH
(a) Disconnect the 2 connectors.
(b) Detach the 2 claws and remove the light.
Installation
LIGHTING: PERSONAL LIGHT ASSEMBLY (for Outer Rear View Mirror): INSTALLATION
HINT
*
Use the same procedure for the LH side and RH side.
*
The procedure listed below are for the LH side.
1. INSTALL OUTER MIRROR LIGHT ASSEMBLY LH
(a) Attach the 2 claws to install the light.
(b) Connect the 2 connectors.
2. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY See: Mirrors/Service and Repair/Outer Rear View Mirror Glass/Installation