Tundra 4WD V8-4.6L (1UR-FE) (2010)
Removal
INTERIOR: ROOF HEADLINING (for CrewMax): REMOVAL
1. LOWER BACK WINDOW GLASS
HINT
Make sure to completely lower the back window glass so that the roof headlining can be removed from the rear of the vehicle.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
3. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
(a) Remove the front seat assembly See: Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual Seat)/Removal.
4. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
(a) Remove the front seat assembly See: Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Removal.
5. REMOVE FRONT SEAT ASSEMBLY (for Center Seat)
(a) Remove the front seat assembly See: Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Center Seat)/Removal.
6. REMOVE REAR SEAT ASSEMBLY (for CrewMax LH Side)
(a) Remove the rear seat assembly See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for Crewmax LH
Side)/Removal.
7. REMOVE REAR SEAT ASSEMBLY (for CrewMax RH Side)
(a) Remove the rear seat assembly See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for Crewmax RH
Side)/Removal.
8. REMOVE FRONT DOOR SCUFF PLATE LH